160C²-civil

UNAC 160C²

A compact and powerful tool carrier

Maniable

Handy

Handy

compact

Compact

Compact

robuste

Robust

Robust

souris scroll

UNAC 160C²

A compact and powerful tool carrier

The 160C² is a compact 175 hp tracker. It can be fitted with a horizontal shaft mulcher or a gyro mulcher thanks to its Category 2 3-point attachment system.

The 160C² is equipped with a hydrostatic drive for both the tool and the drive. The hydraulic system consists of 5 dedicated pumps and a 200 L tank, allowing it to work in optimal condition at all times. The 160C² can also be equipped with a winch and a 30 m cable.

160C

TECHNICAL DATA

Cab

  • Low cab positioned above the tool for optimum view of the working area and 360° visibility.
  • Protective grills on the side windows.
  • Soundproofed, air-conditioned and heated.
  • Adjustable suspension seat with headrest and armrests.
  • Forestry-friendly controls: simple, reliable and efficient.
  • 25 mm thick supporting structure
  • Welded boxed assembly
  • CATERPILLAR type rollers, idler wheel and sprocket
  • Chain tensioning by grease cylinder
  • Sprocket drive with disengageable epicyclic gear motor
  • Flat steel tiles with double edge profile
  • Ground pressure: 0.53 kg/cm².
  • Tile width: 400 mm
  • Diesel CATERPILLAR© C4.4 ACERT, stage V compliant
  • Power 175 hp / 129 kW; Maximum speed 2,300 rpm

Hydraulic (4 speeds by electronic management):

  • - transmission torque (working or moving): 4300 daN.m
  • - max. working speed: 4 km/h
  • - max. travelling speed: 6 km/h
  • Geared motors with positive pressure relief

 

  • Diesel tank 150 L
  • Consumption 14 L/h
  • 7,300 kg without shredder
  • 9,300 kg with shredder

MISSIONS

Mass clearing

- 360° visibility with panoramic view and rear-view camera for safe manoeuvring.

- User interface for direct display of all engine and hydraulic parameters.

- Robust machine specially designed for forestry work with reinforced armouring under the chassis and a clean design. No components exposed to the outside environment for maximum service life.

- Compact and small machine for all-terrain mobility with manoeuvrability and strength.

Optimum stability due to a low centre of gravity.

- ROPS/FOPS/OPS certified cab which complies with European safety standrards.

image-160C²-4

OUR PRODUCTS

300RR²

The road-rail brushcutter

Maniable confort rail
300RR2

300RR².1

The long range road-rail cutter

Maniable rail longue-portee
300RR2-1

FlexTrailer

The modular rail trailer

polyvalent robuste simple
Flextrailer

UNAC 22F(Outside Europe)

The road-rail excavator

puissant polyvalent intuitive
22f

UNAC 160C²

A compact and powerful tool carrier

Maniable compact robuste
160C2
| Legal information - Personal data |